{"product_id":"coin-dust-collection-box-for-xtool-f1-f2-ultra-fiber-lasers-40mm-or-50mm","title":"Coin Dust Collection Box for xTool F1 \/ F2 Ultra \u0026 Fiber Lasers | 32mm, 40mm or 50mm","description":"\u003cp\u003e\u003cstrong\u003eKeep brass dust off your laser, your lens and your lungs.\u003c\/strong\u003e Embossing and deep-engraving coins on a fiber laser throws off fine metal dust that drifts everywhere and works its way into your machine's exhaust fan. This box encloses the coin and pulls that dust straight into your vent, right where it's made.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/blogs\/guides\/coin-dust-collection-box-setup-guide\"\u003e\u003cstrong\u003e📘 Read the step-by-step setup guide and filter care tips →\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoin sits right on your metal bed.\u003c\/strong\u003e The base plate locates the coin with a through-pocket, so it rests on the laser's bed, not on plastic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChanneled airflow.\u003c\/strong\u003e The top opening drops into a tube right over the coin, and a dedicated exhaust channel carries dust out the back to your vent. Nothing gets lost in empty corners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinger-loop side vent.\u003c\/strong\u003e A flush slider with the READY TO PRINT 3D wordmark opens a side air channel that sweeps across the coin face. Pull the finger loop to open it for extra cross-flow, push it closed to pull everything through the top.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam-fitted top opening.\u003c\/strong\u003e The opening is sized to the laser's beam path, so it stays as closed as possible without clipping the beam on any coin up to 50 mm (lens distances 150–500 mm, coin centered).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlide-on housing.\u003c\/strong\u003e The housing slides along a dovetail on the base plate and clicks into place. Its outlet plugs straight into the vent bracket, so the air path is sealed from the coin to your fan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-free thumbscrews.\u003c\/strong\u003e The base plate locks down at all four corners, and the vent bracket with two more.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentered on the laser.\u003c\/strong\u003e It mounts to the bed holes so the coin lands in the same spot every time. Set up your project once and run batches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoin size:\u003c\/strong\u003e 32 mm, 40 mm or 50 mm. One housing fits every coin up to 50 mm; the base plate is what's sized to your coin. Plates swap in seconds, so if you run more than one size, add \u003ca href=\"\/products\/coin-dust-box-extra-base-plate\"\u003eextra base plates\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVent:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003exTool:\u003c\/strong\u003e the stock xTool exhaust hose plugs on exactly like it does on the back of the machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\":\u003c\/strong\u003e clamps to standard 4\" flex duct, such as AC Infinity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\"\/xTool Combo:\u003c\/strong\u003e a stepped outlet that takes either the 4\" duct or the xTool hose.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersion:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e a slim vent bracket that goes straight from the box to your hose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter (MERV 13):\u003c\/strong\u003e the vent bracket has a slide-out filter tray that holds a MERV 13 pad to catch brass dust before it reaches your hose, fan or filter pack. Filter pad not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e+ 4\" Blast Gate:\u003c\/strong\u003e adds our clamp-on 4\" blast gate with its open-seal cap (see below). Also sold on its own.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed a coin size that isn't listed? Email info@rtp3d.com and we'll look at a custom size.\u003c\/p\u003e\n\u003ch3\u003e4\" Blast Gate add-on\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits any 4\" (100 mm) inline duct, splitter or fitting with a snug friction fit, then locks with a 4\" hose clamp. Need a different size? Email info@rtp3d.com.\u003c\/li\u003e\n\u003cli\u003eLow-profile one-piece body with a snug-fitting blade that seals at the face when closed. Your 4\" duct clamps onto the other end.\u003c\/li\u003e\n\u003cli\u003eIncludes an \u003cstrong\u003eopen-seal cap\u003c\/strong\u003e: pull the blade and push the cap into the slot when you want that line fully open. The airway stays completely clear and the blade slot can't leak.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFilter pads (Filter version)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter pad not included.\u003c\/strong\u003e The tray takes a 94 × 94 mm square cut from any cut-to-fit MERV 13 filter media (sold in rolls and sheets online and at hardware stores). One 24\" × 96\" roll makes about 60 pads.\u003c\/li\u003e\n\u003cli\u003eReplace the pad when it's visibly loaded with dust or the airflow drops. Swapping a pad takes seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003exTool F1 Ultra and F2 Ultra (MOPA). Mounts with M4 thumbscrews in the stock bed holes.\u003c\/li\u003e\n\u003cli\u003eGeneric fiber \/ MOPA lasers with M5 holes on a 25 mm grid. The base plate and bracket have M5 holes too; leave a note at checkout and we'll include M5 thumbscrew knobs (M5 screws not included).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing (orange) with finger-loop slider (black, orange wordmark inlay)\u003c\/li\u003e\n\u003cli\u003eBase plate for the coin size you choose (orange). Extra plates for other sizes are sold separately.\u003c\/li\u003e\n\u003cli\u003eVent bracket for your vent option (black)\u003c\/li\u003e\n\u003cli\u003eFilter version: slide-out filter tray (black)\u003c\/li\u003e\n\u003cli\u003eBlast Gate versions: 4\" blast gate body, blade and open-seal cap\u003c\/li\u003e\n\u003cli\u003eThumbscrew knobs with M4 screws for xTool mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e MERV 13 filter pad, coins, hoses, duct, clamps or fan. Coins shown in the photos are for reference only.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinted in PETG.\u003c\/li\u003e\n\u003cli\u003eRun it to a filtered vacuum, fume extractor or inline fan.\u003c\/li\u003e\n\u003cli\u003eFocus on the coin's surface before you slide the housing on.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesigned and made in Jacksonville, FL by Ready to Print 3D, a veteran-owned and operated shop.\u003c\/p\u003e\n","brand":"Ready to Print 3D","offers":[{"title":"32mm \/ xTool \/ Standard","offer_id":49516650791102,"sku":"RTP-COINDUST-32-XT-STD","price":44.99,"currency_code":"USD","in_stock":true},{"title":"32mm \/ 4\" \/ Standard","offer_id":49516650823870,"sku":"RTP-COINDUST-32-4IN-STD","price":44.99,"currency_code":"USD","in_stock":true},{"title":"32mm \/ 4\"\/xTool Combo \/ Standard","offer_id":49516650856638,"sku":"RTP-COINDUST-32-COMBO-STD","price":49.99,"currency_code":"USD","in_stock":true},{"title":"40mm \/ xTool \/ Standard","offer_id":49511757709502,"sku":"RTP-COINDUST-40-XT-STD","price":44.99,"currency_code":"USD","in_stock":true},{"title":"40mm \/ 4\" \/ Standard","offer_id":49511757742270,"sku":"RTP-COINDUST-40-4IN-STD","price":44.99,"currency_code":"USD","in_stock":true},{"title":"40mm \/ 4\"\/xTool Combo \/ Standard","offer_id":49511757775038,"sku":"RTP-COINDUST-40-COMBO-STD","price":49.99,"currency_code":"USD","in_stock":true},{"title":"50mm \/ xTool \/ Standard","offer_id":49511757807806,"sku":"RTP-COINDUST-50-XT-STD","price":49.99,"currency_code":"USD","in_stock":true},{"title":"50mm \/ 4\" \/ Standard","offer_id":49511757840574,"sku":"RTP-COINDUST-50-4IN-STD","price":49.99,"currency_code":"USD","in_stock":true},{"title":"50mm \/ 4\"\/xTool Combo \/ Standard","offer_id":49511757873342,"sku":"RTP-COINDUST-50-COMBO-STD","price":54.99,"currency_code":"USD","in_stock":true},{"title":"32mm \/ xTool \/ Filter (MERV 13)","offer_id":49553915117758,"sku":"RTP-COINDUST-32-XT-FLT","price":54.99,"currency_code":"USD","in_stock":true},{"title":"32mm \/ xTool \/ Standard + 4\" Blast Gate","offer_id":49553915150526,"sku":"RTP-COINDUST-32-XT-STD-GATE","price":64.99,"currency_code":"USD","in_stock":true},{"title":"32mm \/ xTool \/ Filter + 4\" Blast Gate","offer_id":49553915183294,"sku":"RTP-COINDUST-32-XT-FLT-GATE","price":74.99,"currency_code":"USD","in_stock":true},{"title":"32mm \/ 4\" \/ Filter (MERV 13)","offer_id":49553915216062,"sku":"RTP-COINDUST-32-4IN-FLT","price":54.99,"currency_code":"USD","in_stock":true},{"title":"32mm \/ 4\" \/ Standard + 4\" Blast Gate","offer_id":49553915248830,"sku":"RTP-COINDUST-32-4IN-STD-GATE","price":64.99,"currency_code":"USD","in_stock":true},{"title":"32mm \/ 4\" \/ Filter + 4\" Blast Gate","offer_id":49553915281598,"sku":"RTP-COINDUST-32-4IN-FLT-GATE","price":74.99,"currency_code":"USD","in_stock":true},{"title":"32mm \/ 4\"\/xTool Combo \/ Filter (MERV 13)","offer_id":49553915314366,"sku":"RTP-COINDUST-32-COMBO-FLT","price":59.99,"currency_code":"USD","in_stock":true},{"title":"32mm \/ 4\"\/xTool Combo \/ Standard + 4\" Blast Gate","offer_id":49553915347134,"sku":"RTP-COINDUST-32-COMBO-STD-GATE","price":69.99,"currency_code":"USD","in_stock":true},{"title":"32mm \/ 4\"\/xTool Combo \/ Filter + 4\" Blast Gate","offer_id":49553915379902,"sku":"RTP-COINDUST-32-COMBO-FLT-GATE","price":79.99,"currency_code":"USD","in_stock":true},{"title":"40mm \/ xTool \/ Filter (MERV 13)","offer_id":49553915412670,"sku":"RTP-COINDUST-40-XT-FLT","price":54.99,"currency_code":"USD","in_stock":true},{"title":"40mm \/ xTool \/ Standard + 4\" Blast Gate","offer_id":49553915445438,"sku":"RTP-COINDUST-40-XT-STD-GATE","price":64.99,"currency_code":"USD","in_stock":true},{"title":"40mm \/ xTool \/ Filter + 4\" Blast Gate","offer_id":49553915478206,"sku":"RTP-COINDUST-40-XT-FLT-GATE","price":74.99,"currency_code":"USD","in_stock":true},{"title":"40mm \/ 4\" \/ Filter (MERV 13)","offer_id":49553915510974,"sku":"RTP-COINDUST-40-4IN-FLT","price":54.99,"currency_code":"USD","in_stock":true},{"title":"40mm \/ 4\" \/ Standard + 4\" Blast Gate","offer_id":49553915543742,"sku":"RTP-COINDUST-40-4IN-STD-GATE","price":64.99,"currency_code":"USD","in_stock":true},{"title":"40mm \/ 4\" \/ Filter + 4\" Blast Gate","offer_id":49553915576510,"sku":"RTP-COINDUST-40-4IN-FLT-GATE","price":74.99,"currency_code":"USD","in_stock":true},{"title":"40mm \/ 4\"\/xTool Combo \/ Filter (MERV 13)","offer_id":49553915609278,"sku":"RTP-COINDUST-40-COMBO-FLT","price":59.99,"currency_code":"USD","in_stock":true},{"title":"40mm \/ 4\"\/xTool Combo \/ Standard + 4\" Blast Gate","offer_id":49553915642046,"sku":"RTP-COINDUST-40-COMBO-STD-GATE","price":69.99,"currency_code":"USD","in_stock":true},{"title":"40mm \/ 4\"\/xTool Combo \/ Filter + 4\" Blast Gate","offer_id":49553915674814,"sku":"RTP-COINDUST-40-COMBO-FLT-GATE","price":79.99,"currency_code":"USD","in_stock":true},{"title":"50mm \/ xTool \/ Filter (MERV 13)","offer_id":49553915707582,"sku":"RTP-COINDUST-50-XT-FLT","price":59.99,"currency_code":"USD","in_stock":true},{"title":"50mm \/ xTool \/ Standard + 4\" Blast Gate","offer_id":49553915740350,"sku":"RTP-COINDUST-50-XT-STD-GATE","price":69.99,"currency_code":"USD","in_stock":true},{"title":"50mm \/ xTool \/ Filter + 4\" Blast Gate","offer_id":49553915773118,"sku":"RTP-COINDUST-50-XT-FLT-GATE","price":79.99,"currency_code":"USD","in_stock":true},{"title":"50mm \/ 4\" \/ Filter (MERV 13)","offer_id":49553915805886,"sku":"RTP-COINDUST-50-4IN-FLT","price":59.99,"currency_code":"USD","in_stock":true},{"title":"50mm \/ 4\" \/ Standard + 4\" Blast Gate","offer_id":49553915838654,"sku":"RTP-COINDUST-50-4IN-STD-GATE","price":69.99,"currency_code":"USD","in_stock":true},{"title":"50mm \/ 4\" \/ Filter + 4\" Blast Gate","offer_id":49553915871422,"sku":"RTP-COINDUST-50-4IN-FLT-GATE","price":79.99,"currency_code":"USD","in_stock":true},{"title":"50mm \/ 4\"\/xTool Combo \/ Filter (MERV 13)","offer_id":49553915904190,"sku":"RTP-COINDUST-50-COMBO-FLT","price":64.99,"currency_code":"USD","in_stock":true},{"title":"50mm \/ 4\"\/xTool Combo \/ Standard + 4\" Blast Gate","offer_id":49553915936958,"sku":"RTP-COINDUST-50-COMBO-STD-GATE","price":74.99,"currency_code":"USD","in_stock":true},{"title":"50mm \/ 4\"\/xTool Combo \/ Filter + 4\" Blast Gate","offer_id":49553915969726,"sku":"RTP-COINDUST-50-COMBO-FLT-GATE","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/1028\/7294\/files\/RTP3D_CoinDustBox_v41_1_Hero.jpg?v=1793718515","url":"https:\/\/www.readytoprint3d.com\/products\/coin-dust-collection-box-for-xtool-f1-f2-ultra-fiber-lasers-40mm-or-50mm","provider":"Ready to Print 3D","version":"1.0","type":"link"}